&clock24
The same as &clock option, except it uses 24-hour time for the display
Last updated
The same as &clock option, except it uses 24-hour time for the display
Last updated
General Option! (&push
, &room
, &view
, &scene
, &solo
, &director
)
Example: &clock24=5
1
- 9
Shows the current time as in the graphic below. Each option specifies where the clock will appear on the screen
9
| (no value given)
Shows the current time in the lower right
false
Will force-disable the clock from being remotely triggerable
&clock24
is the same as the existing &clock
option, (which shows a clock) except it uses 24-hour time for the display (vs. am/pm).
If the director uses &clock24
on their URL, and then enables the room clock, it will be 24-hour time for all guests, matching the director's settings.
Shows the current time in the lower right; this can be applied to pretty much all link types.
The director has a button that lets them enable the clock for everyone in the room (via the director's room settings button).
The director will see the clock also; it will just be a bit smaller on screen.